Full-Auto Bottle Blowing Machine(10L-20L)
10L-5L two cavity automatic blow molding machine
10L-5L PET blow moulding machine is used to produce 10-5L gallon PET bottle that is now demanded extremely in the market. Facing great demand for 10-5L gallon PET bottle at market, will certainly become the right machine for your investment. The whole procedure is automatic. It is controlled with microcomputer. In order to achieve the purpose of automatic transporting bottles, the user should connect the conveyor belt with the blow molding machine.
By transmission device, the machine can be connected to the filling machine directly and start inline filling.
1. Stable performance with advanced PLC.
2. Automatic preform conveyer to save human cost.
3. Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4. High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5. High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6. Introduce the FESTO air cylinder to avoid contamination and noise.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mould.
9. Two ways of operating: Automatic and manual.
10. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
11. Contamination is avoided for the bottle body.
12. Ideal effect of the chilling with the chilling system.
13. Easy installation and starting
14. Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
1. Low costhigh efficiencyeasy operation and maintenance, etc, profited from the fully automatic technological process.
2.Ideal cooling system make the finished bottles without any flaws.
3. Easy for you to installtest and start up.
4. Low rejection rate: Less than 0.2 percent.
5.Customized bottle mold design.
|Product parameters||Maximum capacity||5L||10L|
|Number of cavities||2Cavites||2Cavites|
|The maximum diameter||210mm||260mm|
|Power specifications||Number of lamps||60pcs||60pcs|
|Maximum heating power||100kw||100kw|
|Total power of the machine||100kw||100kw|
|Actual power consumption||22kw||22kw|
|Air pressure specifications||Working pressure||0.7-0.9mpa||0.7-0.9mpa|
|Low voltage power consumption||2600ltr/min||2600ltr/min|
|High voltage power consumption||4500-5000ltr/min||4500-5000ltr/min|
|Cooling water specifications||Working pressure||5-6kc/c㎡||5-6kc/c㎡|
|Appearance specifications||Machine size||5.6*2.1*2.1m||5.6*2.1*2.1m|
Private server host.
PLC control Brand: Mitsubishi Option Brand: Siemens
Infrared heating lamp tube Ruby Lamp
Mold lock.--Servo motor system
Flip the cylinder,festo...
Blowing vale Fisto..